STS / ATS

  1. Home
  2. Products
  3. Transfer Switches

AIC&P Power Supply

Delivering a flawless and clean power supply to the loads is the main mission of AIC&P. Together with UPS, Automatic Transfer Switches and Static Transfer Switches are one of the main solutions required to achieve this result. Thanks to their technology, the transfer time between two sources is so reduced that it is not even perceived by the most critical IT loads. Therefore, these products have been chosen by the most known international brands.

STS

STS

TOP PERFORMANCE FOR HIGH POWER CRITICAL LOADS

High performance STS, up to 3000A with extremely short transfer time (<=5ms). Its overload capability enables its use also in heavy duty applications. Thanks to its internal redundancy and oversizing it guarantees maximum reliability

Features

  • Voltage and frequency continuous monitoring and synchronizing
  • Extremely rapid automatic transfer (<= 5ms) thanks to continuous synchronisation, without sources connection
  • No transfer under short circuit after the STS, to keep up the current until the correct protections work
  • Continuous check of the SCR proper working and backfeed protection
  • Dual bypass, one per source, to achieve total sources independence in case of maintenance
  • Maximum reliability thanks to redundant internal power supplies and cooling, plus oversizing of the neutral
  • Front access for easy maintenance
  • Bottom connection as a standard, top connection possible to simplify installation in any condition
  • Wide communication offer as a standard: dry contacts, RS 232, RS485
  • Use of Circuit Breakers, for best protection in all conditions
  • Operation without Neutral
  • Isolation transformer
  • Plug-in breakers
  • Additional dry contact board
  • 4-pole configuration
  • E-box open chassis version
ATS
ATS
ATS
ATS

ATS

RELIABLE SUPPLY FOR SINGLE CORDED SERVERS

Highly reliable Automatic Transfer Switch with user friendly interface. Hot swappable version for maximum supply availability.

Features

  • Two separate independent sources
  • Provide redundant power supply to single corded equipment
  • Fast automatic switch between two sources
  • High reliability
  • User friendly operation with LCD/LED display
  • Single phase 16A/32A
  • 19" rack design
  • ITS version: hot swappable ATS version for maintenance purposes
  • Proven field measured reliability
  • Programmable output dry contact
  • EPO – Emergency Power Off
  • New Output terminals for 32A : 12x IEC C13 + 2x IEC C19 + 1x full rated hard wired terminals
  • Output terminals for 16A : 8x IEC C13 + 1x IEC C19
  • 120V versions available
  • ITS with single full load terminal output
  • IEC Lockable avaiable

Our Clients